Mon-Fri: 7AM-7PM, Sat: 8AM-5PM Licensed & Insured [email protected] Serving all of Georgia

Deck Restoration & Staining for Cedar in Georgia

Low-pressure wash for cedar. Deck restoration that cleans or strips the old finish, brightens the wood and applies a new penetrating stain or sealer. Typical cost $800-$2,500.

From the free quote to the final rinse, deck restoration & staining for cedar in Georgia follows a simple process: inspect, protect, clean, rinse and check. With cedar, the right approach is low-pressure wash.

The right method for the job

Low-pressure washCleaning method
Usually 500-800 PSI; cedar is soft and marks easilyPressure

Cleaning solution: A wood cleaner and brightener suited to cedar.

What to know about cleaning cedar

Cedar decks and fences turn silver-gray as the surface weathers. Gentle cleaning with a wood cleaner and brightener brings back the color, and a penetrating stain keeps it longer.

Avoid: High pressure, which gouges the soft wood and raises the grain.

How often: Clean yearly; refinish every 2-3 years.

When to book deck restoration & staining for cedar

  • Stain peeling, flaking or worn through in traffic areas
  • Gray wood that soaks up water
  • Cracking, splitting or splinters
  • Black spots that come back after washing

What causes the dirt and stains

  • UV breaking down the stain and wood surface
  • Film-forming stains that peel instead of wearing
  • Water standing on boards
  • Mildew feeding on old finish

Easy upkeep between cleanings

  • Do the 'water drop test': if water soaks in instead of beading, the wood needs sealing
  • Replace or fasten loose boards and popped nails first
  • Keep the deck clean between finishes

Not sure what you're looking at? The free stain identifier and safe pressure guide explain each stain and surface.

Why more pressure isn’t better

  • Stain over dirty or damp wood, which peels quickly
  • Stripping with too much pressure
  • Mixing incompatible old and new stains
  • Staining in direct hot sun, which leaves lap marks

What happens on the day

  1. Inspect the deck and the old finish and choose a stain with you
  2. Clean or strip the old finish
  3. Brighten the wood and let it dry fully
  4. Sand rough spots where needed
  5. Apply a penetrating stain or sealer and allow it to cure

How much does deck restoration & staining for cedar cost?

$800-$2,500Typical range for a typical 200-400 sq ft deck with rails
1-2 days including dry timeTypical time on site
Every 2-3 yearsRecommended frequency

What moves the price:

  • Size: square footage of siding, roof or flatwork
  • Condition: heavy growth, old stains and peeling finishes take longer
  • Access: number of stories, roof pitch, slopes and how close we can park
  • Add-ons: sealing, gutter brightening and other services done in the same trip

These are typical U.S. ranges, not a quote. You get an exact price before any work starts. For a quick estimate, try the pressure washing cost calculator.

Other services for cedar

Deck Restoration & Staining for Cedar in Georgia

Wood decks and fences in Georgia mildew fast and can rot where water and leaves sit. Cleaning every year and refinishing every two to three keeps the wood sound.

Spring pollen season in Georgia coats houses, cars, screens and patios in a yellow-green film, and pollen gives mildew something to feed on. Many homeowners book their wash after pollen season ends so the house stays clean longer.

We cover 282 cities and towns across Georgia. Find deck restoration & staining for cedar in your city:

Deck Restoration & Staining for Cedar: frequently asked questions

How much does deck restoration & staining for cedar cost in Georgia?

Deck Restoration & Staining for Cedar typically costs $800-$2,500 for a typical 200-400 sq ft deck with rails, and usually takes 1-2 days including dry time. The exact price depends on the size and condition, and you get it before any work starts. Call (555) 010-0000 for a free quote.

Do you use high pressure for deck restoration & staining for cedar?

For cedar: usually 500-800 PSI; cedar is soft and marks easily. What we avoid: high pressure, which gouges the soft wood and raises the grain. The cleaning solution does most of the work, followed by a gentle rinse.

Is deck restoration & staining for cedar safe for my plants and pets?

We pre-wet plants and lawns, keep cleaning solutions diluted to what the surface needs, and rinse landscaping again when we finish. Keep pets and children inside until surfaces are rinsed and dry.

How often should I schedule deck restoration & staining for cedar?

Clean yearly; refinish every 2-3 years. Shade, nearby trees, humidity and heavy traffic mean more frequent cleaning; sunny, dry spots can go longer. Our free cleaning frequency tool gives a recommendation for your climate.

What if it rains on the day?

Light rain doesn't stop most washing, but heavy rain, high wind, lightning and freezing temperatures do, and sealers and stains need dry weather to cure. If the weather isn't right, we reschedule at no charge. Our work is backed by a satisfaction guarantee.

More services

Popular Exterior Cleaning Services in Georgia

Pressure Washing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$600

Fleet Washing

On-site washing for company trucks, vans, trailers and equipment, scheduled at your yard.

Typical $150-$800

Commercial Pressure Washing for EIFS (Synthetic Stucco)

Soft wash. EIFS looks like stucco but is a foam insulation board with a thin acrylic finish coat.

Typical $400-$2,000

Patio Cleaning for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$400

Solar Panel Cleaning

Gentle solar panel cleaning with soft brushes and purified water, never pressure washing.

Typical $150-$350

HOA & Apartment Pressure Washing for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $800-$5,000

Pressure Washing for Pavers

Pressure wash with a surface cleaner. Cleaning concrete and brick pavers removes weeds, moss and stains, but some joint sand washes out with them.

Typical $150-$600

Rust Stain Removal for Stucco

Soft wash. Traditional stucco is porous and holds moisture, which is why it streaks green and black in humid and shaded spots.

Typical $150-$500

HOA & Apartment Pressure Washing for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $800-$5,000

Rust Stain Removal for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $150-$500

Concrete Sealing for Concrete

Pressure wash with a surface cleaner. Plain broom-finish concrete is the surface pressure washing is made for.

Typical $400-$1,200

Patio Cleaning for Brick

Low-pressure wash. Brick is tough, but the mortar joints are softer than the brick itself, and older soft-fired brick can pit.

Typical $150-$400

Ready for a cleaner home or business?

Get a free pressure washing quote in Georgia. Tell us what needs cleaning and we'll give you a price and the next available date.

Call NowFree Quote